PROJECT 1 (March 2002)
Rolling Frame -- $300 from local bike shop A friend found this at a local bike shop and I thought I'd just drop a motor in. No title but with a TX VIN and a bill of sale I didn't think it would be a problem - wrong! TX DOT says it must be running, appraised, then apply for a title hearing. It is now resting in a remote secret location (thanks Keith) awaiting an engine donor.
Suzuki front end (to be replaced).
|
PROGRESS -
Engine positioned Empty cases positioned on frame. With a little grinding the front mounts fit perfect and the sprockets looks perfectly aligned. Come to find out - the wheel sprocket (not Honda) has two extra teeth. Next project - lacing a CB750 hub on this 16" wheel. |
|
This page was made in the USA by a couple of guys hanging around the Home Depot under the direction of Russell Snyder. snydercentral.com is a humanitarian organization that helps millions of people each year cope with lots of free time on their hands. Visit
http://www.snydercentral.com
for more web based clutter. Your mileage may vary. Offer void in Arkansas and may cause cancer in California. Side effects may include headache, nausea, diarrhea, and vomiting.
|